Engine

20W50 Engine & Transmission Oil

Red Line synthetic oil uses superior ester base stocks that provide extreme stability at high temperatures and superior film strength at lower viscosities where more power can be produced. 20W50 Red Line Oil is used on both Engine and on Transmission...

Aluminum Crush Washer Pack

High Quality Crush Washers made from aluminum. Very simple, and important item to replace every time the drain plug is removed. These crush washers will properly seal the drain plug by crushing itself and reaching every and all of the...

Aluminum Deep Oil Sump

Protects your Ural engine during colder months. The Deep Sump allow plentiful oil flow in to the engine providing for a smoother, more reliable operation. Decreases engine wear and significantly increases service lifetime Note: For 2018 &...

Camshaft & Gear Assembly (2010-2013)

Replacement Engine Camshaft for all 2010-2013 models.

Camshaft (2014-2018)

Replacement Engine Camshaft for all 2014-2018 models.

Camshaft Seal & Spring

Camshaft Seal with Spring. Part 5 in figure below. Ural part number: IMZ-8.128-04050

Carburetor Branch Pipe (New Style)

New Style 2013 Carburetor Branch Pipes. Upgrade yours today; the new branch pipe will eliminate the 3-piece branch pipe system that is used on 2012 and older Urals with a 750cc engine. These are individual replacement pipes. Clamps and Complete Branch...

Carburetor Branch Pipe Clamp (New Style)

Replacement 40-60mm clamp for the carburetor branch pipes. These clamps are sold individually. Requires Philips head screwdriver or 6mm socket. New Style Carburetor Kit New Style Carburetor Branch Pipe

Carburetor Branch Pipe Kit (New Style)

Updated carburetor branch pipe kit. This kit includes both the left and right branch pipes and the four clamps required to secure them to the Ural airbox and carburetor. These parts are a direct fit upgrade to replace the 2012 and older Ural with a 750cc...

Carburetor Needle Shim Set

Set of six shims used in adjusting the jets on the Ural carbureted models 2013 and older. 

Collar Assembly & Seal

Collar assembly with seal. Part 3 (made up of parts 5 & 6) in figure below. Ural Part number: IMZ-8.108-01013

Cylinder Head Gasket Kit

Great savings on all gaskets you need for the Cylinder Head available now as a kit. This kit offers all upgraded OEM gaskets to get the job done right. Kit is sold per cylinder, 2 kits needed per motorcycle. Includes:Valve Cover GasketCylinder Head...

Cylinder Head Stud

Each stud is sold individually! Cylinder Head Stud in two sizes: 9.75'' or 11''

Cylinder Reseal Kit

Need to reseal the Cylinder? We got you covered. This kit includes all needed gaskets and seals to properly reseal each cylinder. Kit offers all upgraded OEM gaskets. Each kit is sold per cylinder, 2 kits needed per motorcycle. Includes:Valve Cover...

Cylinder Temperature Sensor (2014+)

Ural Cylinder Temperature Sensor 2014 models

Dual Cylinder Temperature Gauge Kit

Dual Cylinder Temperature Gauge; Another must have for your Ural Motorcycle. With extensive research, our Research and Development team came up with yet another great add on to Ural’s. This Aviation Grade Cylinder Temperature Gauge offers...

Engine Breather Plug Elbow

Genuine Ural replacement engine breather plug, elbow shaped. A necessary part to all the crankcase to vent to the atmosphere properly.

Engine Cylinder Base Paper Gasket

Paper Engine Cylinder Base Gasket. Part 8 in the figure below. Ural part number: IMZ-8.1037-01303

Engine Gasket & Seal Kit

750cc Engine Gasket & Seal Kit for 2006-2018 models.

Engine Oil Dip Stick

Replacement Engine Oil Dip Stick with O-Ring Seal.

Engine Oil Pan Gasket

Replacement Engine Oil Pan Gasket.  Number 3 on Figure Below. Ural part number: IMZ-8.1037-01162

Engine Valve Cover (Patrol & Gear Up)

New valve covers to fit your 2018 and older 750cc Ural (Patrol, Gear Up, Tourist & T), available in different finishes. Dress up your engine, with a new valve cover, each sold individually. Valve cover gaskets also available here.

Engine Valve Cover (Retro)

Retro valve covers for your 2018 and older 750cc Ural, available in different finishes. Dress up your engine, with a new valve cover, each sold individually. Valve cover gaskets also available here.

Inspection Hole Rubber Plug

Replacement Rubber Plug for Engine Flywheel inspection on all Urals, and for Final Drive drum brake on 2013 and older models.

Intake Flange Set

Replacement Intake Flange Set from cylinder head to carburetor or throttle body. Redesigned from older models to securely hold your carburetor/throttle body in place without slipping off. Sold as a one set, two sets needed per motorcycle. Set comes...

Intake Gasket

Replacement air intake gasket for all 750cc Ural models. Item #31 on diagram.

Kick Start Seal

Kick Start Seal. Part 5 on the figure below. Ural part number: NAK TC 01594

Magnetic Drain Plug

These Dimple® oil drain plugs replaces all drain plugs on the bike. Engine, Gear Box and Final Drive. Upgrade yours today. Not your average Ural Drain Plug, This is a "Dimple" manufactured drain plug. In a comparison test against a stock motorcycle...

Oil Cooler Kit

Interested in increasing the engine life on your Ural? Look no further. This Oil Cooler Kit provides a higher oil capacity by adding a total of .8 Quarts of oil, cooler engine oil temperature, and increasing the longevity on your Ural Engine. Designed to...

Oil Filter Bushing

Available separately from the Oil Filter Kit, the Oil Filter Insert Bushing is a critical component that needs replacement at every oil filter change. Fits all 2013 and older models.

Oil Filter Housing

Replacement Oil Filter housing.

Oil Filter Housing Cap

Oil Filter Housing Cap

Oil Filter Housing O-Ring

Available separately from the Oil Filter Kit, the Filter Housing O-Ring is a critical component that needs replacement at every oil filter change. Fits all 2013 and older models.

Pick Up Assembly (Hall Sensor)

Ural pick up switch assembly (hall sensor)

Piston (Size A & B)

Ural Piston for all 750cc Urals from 2003-2021, this is the latest version manufactured by Ural in 2019. This will work on cylinder sizes A or B. It will NOT work for cylinder size C. For C size cylinders, you must upgrade the cylinder to a size A or B...

Piston Ring Set

Replacement piston ring set for 2018 and older models.

Rear Bearing Housing Gasket (2008+)

Rear Bearing Housing Gasket (2008+). Part 15 in the figure below. Ural part number: IMZ-8.1037-01164

Rear Main Seal

Collar Viton. 80x55x10. Part 19 in figure below. Ural Part: IMZ-8.108-01081

Rocker Arm Set

Ural 750cc Rocker Arms. Note: Side is determined by position of rocker arm when installed on cylinder head.

Throttle Body (2014-2018)

Replacement Throttle Body for 2014 to 2018 Ural Fuel injected Models. Comes with ECU and Injector.

Throttle Body Snorkel (2014-2018)

A must have on all 2014-2018 models. This snorkel works as a protection to prevent water intrusion into the barometric sensor in the throttle bodies. A simple and efficient way to prevent water damage on your throttle body. Sold as a pair...

Throttle Cable Complete Kit

Complete Throttle cable kit that will lead from the handlebar throttle grip to the engine. Fit on all 750cc Models. Please select Model Year.Included:(1x) Throttle cable(1x) Cable Splitter(2x) Cables from splitter to engine

Throttle Y-Splitter Adapter

This is a Y-splitter adapter for your throttle and carburators.

Ural Distributer Box Cover Gasket

Ural Distributer Box Cover Gasket. Part 10 in the figure below. Ural part number: IMZ-8.1037-01161

Ural Engine Cylinder Head Gasket

Ural Engine Cylinder Head Gasket. Item # 9 on the below diagram.

Valve Cover Gasket

Engine Valve Cover Gasket. Replaced every time valve cover is open. Part 13 in the figure below.

Valve Cover Nut

Replacement Ural 750CC Cylinder head cover fastening nut.

Valve Cover Stud

Replacement Ural motorcycle 750cc valve cover mounting stud.